Configuring Network Accounting on a Xerox 75xx, 76xx or 77xx series device

In order to track prints, copies and scans using Argos OnBoard for Xerox, the following steps are required.

This is relevant to the following device series:

Workcentre 7755, 7765, 7775, 7525, 7530, 7535, 7545, 7556, 7655, 7665, 7675 and more.

Enable Network Accounting on the device panel

1. At the device panel, click the Machine Status button
   
2. An "Authentication Required" screen will appear. Log in with your Administrator username (default username/password: admin/1111)
   
   
3. Click Tools tab
   
4. Click Accounting Settings>Accounting Mode
5. Select Network Accounting button
   
6. Click Customize Prompts
7. Choose Display Prompt 1 Only from the drop-down menu
   
8. Set Account ID Default Value to 9
9. Click Save
10. Click Code Entry Validation
11. Click Enabled
    
12. Click Save

At this point, the machine will be locked down and users will need to enter a PIN code make copies, scans or faxes.

Upload PIN codes to Xerox device

After enabling Network Accounting, the Xerox User Sync task must be run from Argos. Users will not be able to make copies or prints until this task has run.

• Argos OnBoard for Xerox setup